SHARP MX C382SC MAINTENANCE CODES

SHARP MX C382SC MAINTENANCE CODES

SHARP MX C382SC MAINTENANCE CODES
Sharp MX C382SC Maintenance Codes

Maintenance codes are displayed on the operation panel. The maintenance codes alert the user of a consumable item nearing it's normal maintenance or replacement interval, or the interval has been reached.

When a "the supplies will be needed soon toner cartridge" message is displayed a letter will also be displayed indicating which color will need to be replaced soon.

BK Black (or K)

Y Yellow

M Magenta

C Cyan

It is not necessary to replace the toner at the time a "toner supply is low" message is displayed, but it is advisable to make sure you have another toner cartridge on hand.  If you continue to use the machine without replacing the cartridge the following message is displayed  "change the supplies toner cartridge" and the machine will stop printing.

If any one of the color toners runs out (including black toner), color printing will not be possible. If Y, M, or C toner runs out but Bk toner remains, black and white printing will still be possible.

Keep the used toner cartridge in a plastic bag (do not discard it). Your service technician will collect the used toner cartridge.

To view the approximate amount of toner remaining, continually touch the [COPY] key during printing or when the machine is idle. The percentage of toner remaining will appear in the display while the key is touched. When the percentage falls to "25-0%", obtain a new toner cartridge and keep it ready for replacement.

Depending on your conditions of use, the color may become faint or the image blurred.

MAINTENANCE COUNTERS

TA THE MAINTENANCE COUNTER (TOTAL) REACHES 90% OF THE SET VALUE

CA THE MAINTENANCE COUNTER (COLOR) REACHES 90% OF THE SET VALUE

AA THE MAINTENANCE COUNTERS (BOTH OF TOTAL AND COLOR) REACHES 90% OF THE SET VALUE

If your machine is displaying one of these codes let your service provider know. They indicate a service interval is coming up soon. The machine will continue to print normally. When the service has been performed the service provider will reset the counters and the codes will stop being displayed. In some cases, the machine may be set to stop printing when these codes are displayed.

CHANGE THE SUPPLIES PRIMARY TRANSFER BELT UNIT

This message is displayed when the primary transfer belt counter has reached 120,000. The machine will continue to print normally. When the service has been performed the service provider will reset the counters and the message will stop being displayed. In some cases, the machine may be set to stop printing when this message is displayed.

THE SUPPLIES WILL BE NEEDED SOON PRIMARY TRANSFER BELT UNIT

This message is displayed when the primary transfer belt counter has reached 90% of 120,000. The machine will continue to print normally until the counter reaches 120,000 and then the machine will stop printing. When the service has been performed the service provider will reset the counters and the message will stop being displayed.

CHANGE THE SUPPLIES SECONDARY TRANSFER ROLLER UNIT

This message is displayed when the secondary transfer roller unit counter has reached 60,000. The machine will continue to print normally. When the service has been performed the service provider will reset the counters and the message will stop being displayed. In some cases, the machine may be set to stop printing when this message is displayed.

THE SUPPLIES WILL BE NEEDED SOON SECONDARY TRANSFER ROLLER UNIT

This message is displayed when the secondary transfer roller unit counter has reached 90% of 60,000. The machine will continue to print normally until the counter reaches 60,000 and then the machine will stop printing. When the service has been performed the service provider will reset the counters and the message will stop being displayed.

CHANGE THE SUPPLIES FUSING UNIT

This message is displayed when the fusing unit counter has reached 120,000. The machine will continue to print normally. When the service has been performed the service provider will reset the counters and the message will stop being displayed. In some cases, the machine may be set to stop printing when this message is displayed.

THE SUPPLIES WILL BE NEEDED SOON FUSING UNIT

This message is displayed when the primary transfer belt counter has reached 90% of 120,000. The machine will continue to print normally until the counter reaches 120,000 and then the machine will stop printing. When the service has been performed the service provider will reset the counters and the message will stop being displayed.

THE SUPPLIES WILL BE NEEDED SOON DRUM CARTRIDGE

This code is displayed when the drum cartridge has reached 90% of its life expectancy. Based on either the print counter or the rotation counter. The machine will continue printing until the drum has reached 100% of its life expectancy.  When the black drum reaches life end no prints can be made. When the color drums reach life end, no color prints can be made, but black/white prints can still be made. In some cases the machine may be set to continue printing when 100% of drum life has been reached.

K- BLACK DRUM CARTRIDGE (Drum life expectancy 60,000 prints or 550,000 rotations)

C- CYAN DRUM CARTRIDGE (Drum life expectancy 30,000 prints or 550,000 rotations)

M- MAGENTA DRUM CARTRIDGE (Drum life expectancy 30,000 prints or 550,000 rotations)

Y- YELLOW DRUM CARTRIDGE (Drum life expectancy 30,000 prints or 550,000 rotations)

CHANGE THE SUPPLIES DRUM CARTRIDGE

This code is displayed when the drum cartridge has reached 100% of its life expectancy. Based on either the print counter or the rotation counter. When the black drum reaches life end no prints can be made. When only the color drums reach life end, no color prints can be made, but black/white prints can still be made. In some cases the machine may be set to continue printing when 100% of drum life has been reached.

K- BLACK DRUM CARTRIDGE (Drum life expectancy 60,000 prints or 550,000 rotations)

C- CYAN DRUM CARTRIDGE (Drum life expectancy 30,000 prints or 550,000 rotations)

M- MAGENTA DRUM CARTRIDGE (Drum life expectancy 30,000 prints or 550,000 rotations)

Y- YELLOW DRUM CARTRIDGE (Drum life expectancy 30,000 prints or 550,000 rotations)

THE SUPPLIES WILL BE NEEDED SOON DEVELOPER CARTRIDGE

This code is displayed when the developer cartridge has reached 90% of its life expectancy. The machine will continue printing until the developer cartridge has reached 100% of its life expectancy based on either the print counter or the rotation counter. When the black developer cartridge reaches life end no prints can be made. When the color developer cartridges reach life end, no color prints can be made, but black/white prints can still be made. In some cases the machine may be set to continue printing when 100% of drum life has been reached.

K- BLACK DEVELOPER CARTRIDGE (Developer life expectancy 60,000 prints or 550,000 rotations)

C- CYAN DEVELOPER CARTRIDGE (Developer life expectancy 30,000 prints or 550,000 rotations)

M- MAGENTA DEVELOPER CARTRIDGE (Developer life expectancy 30,000 prints or 550,000 rotations)

Y- YELLOW DEVELOPER CARTRIDGE (Developer life expectancy 30,000 prints or 550,000 rotations)

CHANGE THE SUPPLIES DEVELOPER CARTRIDGE

This code is displayed when the developer cartridge has reached 100% of its life expectancy. Based on either the print counter or the rotation counter. When the black developer cartridge reaches life end no prints can be made. When the color developer cartridges reach life end, no color prints can be made, but black/white prints can still be made. In some cases the machine may be set to continue printing when 100% of drum life has been reached.

K- BLACK DEVELOPER CARTRIDGE (Developer life expectancy 60,000 prints or 550,000 rotations)

C- CYAN DEVELOPER CARTRIDGE (Developer life expectancy 30,000 prints or 550,000 rotations)

M- MAGENTA DEVELOPER CARTRIDGE (Developer life expectancy 30,000 prints or 550,000 rotations)

Y- YELLOW DEVELOPER CARTRIDGE (Developer life expectancy 30,000 prints or 550,000 rotations)

THE SUPPLIES WILL BE NEEDED SOON TONER COLLECTION CONTAINER

This message indicates the used toner collection container is almost full. Printing will be disabled when a 500 count has been reached. 1 count for 1 sheet output, when process control is performed (an automatic copy quality adjustment performed by the machine) 10 counts are added.

CHANGE THE SUPPLIES TONER COLLECTION CONTAINER

Replace the used waste toner container. After replacing the toner collection bottle the message will go away and printing will be enabled.

Do not point the holes down as used toner will spill out.
Do not discard the removed waste toner box. Store it in a plastic bag. Your service technician will collect the used toner cartridge.

Our friendly and professional staff is available 8AM – 5PM Mon-Fri to answer questions and schedule appointments.

Call us at: Local 352-505-5855 Or Toll Free 877-852-0044

Scroll to Top